Extreme Networks Summit X440-48p 48 Port 1gbe Managed PoE+ Switch FACTORY RESET

Description

Selling a lot of Extreme Networks Summit X440-48p (16506) Ethernet gigabit (1g) PoE+ network switches.  They have 48 PoE+ ports and 4xSFP ports (shared).  These are Layer 3 fully managed network switches and require no license to use.  Unlike other sellers, these have been factory reset, the web management port has been activated (no serial cable needed), and they are ready to use.  No additional configuration has been done, just activating the management port, all other settings will be just like the factory settings (see below).  These also come with rack ears included.  The fans are not very loud on these, especially compared to other enterprise switches.
Most of the switches were running version 16.1.3b6, but there is no guarantee on the EXOS version.
They have been set to the following:
User: admin
Pass: (blank)
MGMT port: 10.10.10.10
These being factory reset is important to note because factory resetting these switches is not trivial if they were decommissioned while stacked or if they have version 2.0.2.1 bootloader.  In some cases you need to re-flash with a recovery image which Extreme Networks requires a subscription to access.  I have taken care of this for all of these switches so you do not have to deal with that and can use it right out of the box.
Free shipping to the continental USA, additional shipping cost may be required if purchased outside of CONUS.
Some additional specs from the website:
Height: 1.73 inches (4.4 cm)
Width: 17.4 inches (44.1 cm)
Depth: 10.0 inches (25.4 cm)
Weight: 10.7 lb (4.85 kg)
Fan Noise: 42dB(A) (low/normal speed)
IEEE Standards:
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3at PoE Plus
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ae 10GBASE-T